Identify this noise?

[JesusTheAgnostic]

Hey guys, can any of you identify these noises? They're a bit concerning.

https://drive.google.com/drive/folders/0B5yDd7Gu9sbRRjVfRGR4NWFQQTQ?usp=sharing

Also anybody know where the O2 sensor connector is supposed to go?

 

[JesusTheAgnostic]

Anybody?):

 

[Tormach]

The o2 sensor slides onto a clip on the wster outlet, you have to go below the channel and slide up.

The first vid, my car makes that same clacking noise idalling always has, ive never been able pinpoint its exact location. anyone else know what it might be.

The second vid, what is making the gurgling type sound when you rev the engine.

Ill be following this, want to know what is doing the.

 

[JesusTheAgnostic]

Is it the metal one? I don't know how I managed to move it out of the clip.

 

[JesusTheAgnostic]

I don't know what gurgling noise you're talking about because I can't hear it right now, but if it's in the video in which I walk to the car and start revving then it might have been the exhaust it goes pop pop burble burble and if it's straight piped it sounds like it's farting.

 

[lmilam]

My car has the same gurgling noise. Mine is being caused by a faulty seal somewhere in the exhaust system. If you're going slow with the windows down and place the car in manual mode and let off the gas around 4K-5K RPM's, can you hear a gurgle?


Sent from my iPhone using Tapatalk

 

[rojoes]

Sounds like exhaust seal

 

[JesusTheAgnostic]

I have a stick, and turboback exhaust so if I leave the car in gear up to 5k RPM's it'll get really loud and I won't be able to hear anything, any other way to test it?

 

[JesusTheAgnostic]

Sounds like exhaust seal

Which sound? There was actually two, the tapping, the whining when I revved the engine, and the gurgling I couldn't hear.

 

[Tormach]

Ill take a pic of the spot for o2 clip in a moment. The gurgling noise is faint and pops up in the second video only a few times on the quick revs.

See attached pic.

 

[JesusTheAgnostic]

I think you might be talking about the intake o:

 

[boostiboo]

Mines clacking quite a bit too, I think it's just normal for the lifters. As far as the whine mine's been doing something similar except it's on decel not excel. Plus it's got a new growl to it that I can't seem to find as it's only when moving. But I await your solution. Perhaps it'll help me solve my problem.

Sent from my SM-J320V using Tapatalk