Oil filter relocation kit sonic/cruze

[whitesmoke]

I see many guys talking about oil filter relocation, well look no further.
it will be available from BNR shortly. we have had ours for over a year and 20k miles of testing, its golden. increases oil capacity to 5 qts, 10 degree cooler oil temps, and no more pulling charge pipes. filter change takes all of 2 minutes.

WATCH FOR A RELEASE IN THE NEAR FUTURE FROM BNR.

 

[whitesmoke]

Preview

 

[Big Turbo Sonic]

Very nice! Definitely interested!

 

[whitesmoke]

Also to be released

Oil catch can, have done a lot of testing and this will probably be released at the same time.
Has factory end fittings for plug and play installation, real 8an fittings and lines, no bs hose clamps and rubber hose!!!!
Aval in stainless or black braided hose with choice of fitting colors. Only triple baffle catch can on the planet!!!!

 

[carsNskis]

This would be great for RallyCross, and would still be legal for stock class. Looking forward to this one!

[emoji593][emoji809][emoji472]

 

[whitesmoke]

Yea they are both major improvements to both performance and ease of working on the car. tHE OIL FILTER IS A NO BRAINER, BUT I NEVER KNEW THERE WAS THAT MUCH CRAP GOING INTO THE TURBO UNTIL I USED THIS CATCH CAN. EVERY 4-500 MILES I EMPTY IT AND THERE IS A FULL CUP OF MOSTLY WATER IN IT MIXED WITH SOME OILY CRAP, LOOKS LIKE COFFEE, LOL

 

[mja]

5 quarts!

Now I don't have to think about how to fit this deep sump in the car

 

[Tormach]

Yea they are both major improvements to both performance and ease of working on the car. tHE OIL FILTER IS A NO BRAINER, BUT I NEVER KNEW THERE WAS THAT MUCH CRAP GOING INTO THE TURBO UNTIL I USED THIS CATCH CAN. EVERY 4-500 MILES I EMPTY IT AND THERE IS A FULL CUP OF MOSTLY WATER IN IT MIXED WITH SOME OILY CRAP, LOOKS LIKE COFFEE, LOL

Tell me about it, I am so glad I did the research and put together a clean CC setup very similar to what your using. New turbo with over 8k miles on it and it is still spotless. Only thing I would change on mine is I want those OEM fitting with the AN fitting connections.

Def want that Oil filter relocation. Been tempted to do it myself, have it all figured out but don't know where to start for the adapter for our oil filter housing.

 

[Blue Moon Sonic]

This is good looking well made because BNR and definitely addresses the issue with charge pipes getting in the way. My only problem I have with that I'm seeing. Is the location of where it sits. Unless it can be placed somewhere else under the hood, Anyone who wants to go to a larger turbo that is not the GTX upgrade may shy away from the kit because of where the location is. There isn't really a good spot elsewhere to add something like a 6258 or a large garret. That would be one of my biggest factors for not wanting to spring for this. Otherwise, I would be all over this kit the day it goes on sale.

 

[Big Turbo Sonic]

This is good looking well made because BNR and definitely addresses the issue with charge pipes getting in the way. My only problem I have with that I'm seeing. Is the location of where it sits. Unless it can be placed somewhere else under the hood, Anyone who wants to go to a larger turbo that is not the GTX upgrade may shy away from the kit because of where the location is. There isn't really a good spot elsewhere to add something like a 6258 or a large garret. That would be one of my biggest factors for not wanting to spring for this. Otherwise, I would be all over this kit the day it goes on sale.

If you go with a top mount no way. I am going to try with my under mount.

 

[2014 Blue RS]

They could do the MPFab battery tray mod. That would make room to swing over that way.

 

[whitesmoke]

Ok calm down guys

I also have a way to mount it to the pass side firewall, and you can use the same hoses just reversed, the short hose goes to the intake and the long one to the turbo. Since the fittings screw into the hoses its a piece of cake

 

[whitesmoke]

And i can do a different oil filter mount too

 

[Blue Moon Sonic]

If you go with a top mount no way. I am going to try with my under mount.

Curious to see this as this would give more options for mounting.

They could do the MPFab battery tray mod. That would make room to swing over that way.

Good suggestion. Some may be more inclined to move the battery to the spare tire area for weight distribution.

I also have a way to mount it to the pass side firewall, and you can use the same hoses just reversed, the short hose goes to the intake and the long one to the turbo. Since the fittings screw into the hoses its a piece of cake and I can do a different oil filter mount too

Well, that definitely solves the issue for having a top mounted turbo with this cooler. So happy for this to hit the market. Guess better late than never.

 

[cobaltbravo]

Any update on these?
I would have made my own catch can, but I can't find the Norma quick connectors with threads for AN fittings, don't want to use hose clamps on barbed stock ends.

 

[Calorim]

I am also super interested in these two products! When can we expect them to hit the store?

 

[tk6214]

Very interested in these two products.

 

[cwhaiyan]

From what was posted on facebook should be another month or two

Sent from my SM-T580 using Tapatalk

 

[Nataphen]

I’d love to pick up both of these as well. Looking forward to the release.

Will oil pressure and oil temp sending unit provisions be available with them?


Sent from my iPhone using Tapatalk

 

[tk6214]

I’d love to pick up both of these as well. Looking forward to the release.

Will oil pressure and oil temp sending unit provisions be available with them?


Sent from my iPhone using Tapatalk

Oil temp and pressure would be cool as hell