Rickykrudd
New member
Thought I'd do a write-up on something I did last year for my RS hatch.
It worked out great and I still have easy access to my spare tire
3/4" MDF sheet cut to rough size.
Used the trunk bottom as the reference so it will be able to fit into the factory slots.
Test fit
Marking the centor for the sub. Used a single 12" shallow sub
Cutout complete. Also routered the edges and sanded everything well
It worked out great and I still have easy access to my spare tire
3/4" MDF sheet cut to rough size.
Used the trunk bottom as the reference so it will be able to fit into the factory slots.
Test fit
Marking the centor for the sub. Used a single 12" shallow sub
Cutout complete. Also routered the edges and sanded everything well