FS Polyurethane Transmission Mount

[TurtleOverlord]

Poured Forsch 94a 2-part poly into a stock mount.
Stiffness is similar to the BNR mount, maybe more.

I was looking for something softer so I’ll be making more with 60a if anyone is interested it that.

Edit: Sold

 

[TurtleOverlord]

Bump. $50 shipped anywhere in the US.

 

[slowion2]

You ever do one with 60a? Was debating that myself since it's still a daily.

Bump for a good price on a solid mount.

 

[TurtleOverlord]

You ever do one with 60a? Was debating that myself since it's still a daily.

Bump for a good price on a solid mount.

I did, havent taken a look to see how it is holding up, but it is very smooth.
Vibrations only noticeable in cold ~20F winter starts.

I dont think I have enough to pour another one, accidentally wasted some

 

[slowion2]

Just finally getting back on here. If you happen to get bored and want to do another, keep me in mind man! I'm in FL so it barely gets below freezing down here (I'm off a lake with the wind so it's not uncommon).

 

[SuperS13]

Interested for $50

 

[TurtleOverlord]

Interested for $50

Pm'd

 

[Simplyjesse]

Is this sold?

 

[TurtleOverlord]

Is this sold?

Still available

 

[AERSUPERSTAR]

Poured Forsch 94a 2-part poly into a stock mount.
Stiffness is similar to the BNR mount, maybe more.

I was looking for something softer so I’ll be making more with 60a if anyone is interested it that.

$60 shipped

For the 1.8? Looks the same m26 5 speed

 

[TurtleOverlord]

For the 1.8? Looks the same m26 5 speed

Yup, fits all engines/transmissions

 

[AERSUPERSTAR]

That’s good to know I’ve been curious about that and the ignition coil I doubt it would from 1.4 but almost wanna try I’ve went through 4 coils on the 1.8 but this last time spent 170 on the lifetime warranty one autozone or the LS coil swap. And you say u want 60$ shipped for that? Is that low as can go? I need a good solid trans mount. I have the m26 5 speed

 

[TurtleOverlord]

I lowered it to $50 shipped in post #2. Coil packs are not interchangeable.

 

[AERSUPERSTAR]

Yea I read online they’re not I wish they were because all the msd and brands offered for 1.4 but I’ve had to replace the coil like no lie 4/5 times and finally just got the 170 one but I work for car lot so got it for 90 lifetime replacement. But I need some solid mounts especially if I end up with the 1.6 Holden manifold like I’m planning down the line

 

[TurtleOverlord]

Bump. Free + shipping.
Edit: Sold