Wheel Bearing Replacement

[skurtov]

Diagnosed a bad wheel bearing, just curious about a couple things.

The wheel bearing I bought is smooth on the inside, ie. there are no grooves for the axle. Is there a separate piece that's then pressed into the bearing for the axles?

The axle nut has some kind of locker clip on it. As seen in the picture. Is that reusable? I have the axle nut in a cart ready, but just wondering if there anything else extra I have to get.

 

[$ub$onic]

The spindle is 2 pieces

The wheel bearing and hub.

The hub is pressed into the wheel bearing, which in turn is slide into the spindle.

The hub has the axle splines.

As far as the​ axle nut goes, just spin it off, and reuse.



Sent from my S60 using Tapatalk

 

[skurtov]

The spindle is 2 pieces

The wheel bearing and hub.

The hub is pressed into the wheel bearing, which in turn is slide into the spindle.

The hub has the axle splines.

As far as the​ axle nut goes, just spin it off, and reuse.



Sent from my S60 using Tapatalk

Thank you!