Megan Racing Springs??
- Thread starter Bike Muff
- Start date
zomby woof
Member
I guess nobody has them? Was looking at them too, but probably going with the ZZP's then
zomby woof
Member
Thanks. Will check it out
Zurn
Member
Pics?
I'd also like to see some pics of a Sonic with the Megan Racing Springs. I don't use Facebook, or I haven't in a few years. Can somebody post a pic of a Sonic with the Megan Springs installed? I tried looking at the Gamma II page, but you have to be part of the group. I want to drop my RS finally and I'm looking at all the options. Thanks!
I'd also like to see some pics of a Sonic with the Megan Racing Springs. I don't use Facebook, or I haven't in a few years. Can somebody post a pic of a Sonic with the Megan Springs installed? I tried looking at the Gamma II page, but you have to be part of the group. I want to drop my RS finally and I'm looking at all the options. Thanks!
SouthFLSonic
Active member
Sent from my iPhone using Tapatalk
Zurn
Member
Megan Springs Installed
So I found these on ebay for $129 shipped. Figured I couldn't go wrong with drop springs for $129. I didn't want the rear end to sit too high (website shows 1.2 F / 1.1 R) but I've got some extra weight back there so I figured I'd give them a go. I did take before measurements, but I didn't take after. Figured I'd give them a few weeks to settle in. It sure does corner flat, much less body roll and the ride is not bad at all.
Before:
After:
Other Side (cleaned up):
Extra Weight (Project I did last Jan. Took this stuff out of my truck when I sold it, figured I'd put it good use in the Sonic):
Covered:
So I found these on ebay for $129 shipped. Figured I couldn't go wrong with drop springs for $129. I didn't want the rear end to sit too high (website shows 1.2 F / 1.1 R) but I've got some extra weight back there so I figured I'd give them a go. I did take before measurements, but I didn't take after. Figured I'd give them a few weeks to settle in. It sure does corner flat, much less body roll and the ride is not bad at all.
Before:
After:
Other Side (cleaned up):
Extra Weight (Project I did last Jan. Took this stuff out of my truck when I sold it, figured I'd put it good use in the Sonic):
Covered:
So I found these on ebay for $129 shipped. Figured I couldn't go wrong with drop springs for $129. I didn't want the rear end to sit too high (website shows 1.2 F / 1.1 R) but I've got some extra weight back there so I figured I'd give them a go. I did take before measurements, but I didn't take after. Figured I'd give them a few weeks to settle in. It sure does corner flat, much less body roll and the ride is not bad at all.
Before:
After:
Other Side (cleaned up):
Extra Weight (Project I did last Jan. Took this stuff out of my truck when I sold it, figured I'd put it good use in the Sonic):
Covered:
Pictures are missing....
zomby woof
Member
You probably didn't have to quote his whole post to say that...
Tesseract_Indeed
New member
I plan on buying them sometime in the next year or so. I will post before/after pics when I do. And guys, don't forget to get your wheels re-alligned after changing suspension components. Excess camber or toe can kill handling, and kill your tires even quicker.
(Disclaimer, toe kills tires much faster than camber less than -4.00 degrees.)
(Disclaimer, toe kills tires much faster than camber less than -4.00 degrees.)
Last edited:
Tesseract_Indeed
New member
Anybody using these, what sway bar end-links do you run with these? I plan to buy moog endlinks with these, but the stock ones recommended wouldn't work with the drop in height, or so I imagine. Can anyone else confirm?
SouthFLSonic
Active member
I have stock parts with the Megan springs on my car and runs fine no issues last 6 months.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk