Install a use 6t30 since the oem did have a trouble falling in neutral at a stop light and engage back if the rpm was raised .. now with this one i cant perform a transmission learn i always have the hot sump message during the process. Temperature is normal tho not high . Anyone got a idea how to fix it . Bump went u put in drive and kick a little from 4-3 or 5-4 dowshift im not 100% the gear it kick . All other gear work and shift perfect .. i try to figure out why i got that msg on the relearn
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
2013 1.8
- Thread starter modsrx
- Start date
RainingSonics
Member
You're probably done on it by now, but slightly maybe the TECHM, and most likely internal transmission problems. Could also be fluid level so that should have been checked before anything else.
Relearn will not learn if there's a internal transmission problem. All internal problems have to be corrected for Relearn to work or transmission needs to be changed to good working one (and Relearn isn't actually required anyway). Assuming you did have temperature range correct for Relearn and still had problems.
Relearn will not learn if there's a internal transmission problem. All internal problems have to be corrected for Relearn to work or transmission needs to be changed to good working one (and Relearn isn't actually required anyway). Assuming you did have temperature range correct for Relearn and still had problems.
Last edited: