1967stella
New member
Hey all, so I put my self on a very limited budget for the sonic because of buying a new house. To keep my self sane, Im allowing my self to get one small inexpensive part a month. So I decided to get my 3rd brake light flasher module.
I had done quite a bit of research to determine which one I wanted to get, as there are ALOT of them out there. I ended up getting the
" Car Truck Scooter BRAKE LIGHT FLASHER BLINKER 36 Modes !!"
off of ebay... ebay ID= 281096309375
It was only $20 shipped and actually got here much 2 days before it was supposed to which was fantastic.
So on with the install pics.
Picture of the part its self (ebay pics)

and the instruction manual link http://www.xdponline.com/documentation/UnvBrakeFlasher36Install.pdf
step 1: Remove the tape that goes around the 3rd brake light power wires
step 2: Test each wire to determine polarity (mine had BLACK as (-) and BROWN as (+))
Step 3: Once you have determined the (+) in your car, cut the wire right about in the middle (leaving enough wire on each side to strip, solder, and heatshrink/ tape up.
Step 4: Strip back and solder the Red wire on the flasher module to the switch side of the brown wire
Step 5: Strip the Black back on the module and on the cars ground and solder.


Step 6:Strip back the Yellow wire on the module, then Solder and heat shrink to the brown wire on the bulb side.

Step 7: Neatly tape the newly attached wires together, leaving out the 2 white wires.

Step 8: Place something heavy on the brake pedal so the 3rd brake light is on. Then Short the 2 white wires together until you get to the desired flash setting. (There are 36 different modes on this so there are a bunch to choose from.
I dont have a video of them in action yet, because I couldn't press the pedal and record haha. Hopefully ill be able to take one when I get off work tonight with the help of a coworker. But in the mean time here is a video link to youtube of this module on a 3000 GT
Brake Flasher No Delay - YouTube
I had done quite a bit of research to determine which one I wanted to get, as there are ALOT of them out there. I ended up getting the
" Car Truck Scooter BRAKE LIGHT FLASHER BLINKER 36 Modes !!"
off of ebay... ebay ID= 281096309375
It was only $20 shipped and actually got here much 2 days before it was supposed to which was fantastic.
So on with the install pics.
Picture of the part its self (ebay pics)

and the instruction manual link http://www.xdponline.com/documentation/UnvBrakeFlasher36Install.pdf
step 1: Remove the tape that goes around the 3rd brake light power wires
step 2: Test each wire to determine polarity (mine had BLACK as (-) and BROWN as (+))
Step 3: Once you have determined the (+) in your car, cut the wire right about in the middle (leaving enough wire on each side to strip, solder, and heatshrink/ tape up.
Step 4: Strip back and solder the Red wire on the flasher module to the switch side of the brown wire
Step 5: Strip the Black back on the module and on the cars ground and solder.


Step 6:Strip back the Yellow wire on the module, then Solder and heat shrink to the brown wire on the bulb side.

Step 7: Neatly tape the newly attached wires together, leaving out the 2 white wires.

Step 8: Place something heavy on the brake pedal so the 3rd brake light is on. Then Short the 2 white wires together until you get to the desired flash setting. (There are 36 different modes on this so there are a bunch to choose from.
I dont have a video of them in action yet, because I couldn't press the pedal and record haha. Hopefully ill be able to take one when I get off work tonight with the help of a coworker. But in the mean time here is a video link to youtube of this module on a 3000 GT
Brake Flasher No Delay - YouTube