Boost!!
- Thread starter MPFab
- Start date
2014 Blue RS
Active member
Awesome!
ScarabEpic22
Member
Looks good, now really looking forward to the dyno chart!Sneakerfix
New member
What pump are you going with Or will it be a BAP like what I have? I was thinking the 2.0t pump could work but haven't done the leg work maybe even a zl or SS pump
Last edited:
BAP?
Got a C6 ZO6 pump to test fit. It's the same as a Walbro E85 pump. Good to 680ish on the corn. Should be enough
. Pm me your contact info. I wanted to talk to you about your injectors.
Foxbox
New member
BAP?
Got a C6 ZO6 pump to test fit. It's the same as a Walbro E85 pump. Good to 680ish on the corn. Should be enough
Pm me your contact info. I wanted to talk to you about your injectors.
BAP usually stands for Boost-A-Pump.
Sneakerfix
New member
And yes it's a boost a pump only used it because I was spraying at the time. Let me know how the C6 pump works out
Mikeygoolsbay
New member
We need videos!!!!
Sneakerfix
New member
R35 injectors could also work they flow 550 or so at 53lbs or 58lbs.
C6Z fuel pump seems like serious overkill. Is there a cost savings over something simple like a Walbro unit or other aftermarket options? I understand allowing room to grow, but unless you're aiming for 500+whp there are probably better solutions out there. If you're dead set on OEM retrofit the standard C6 pump should be more than sufficient and cost less.
CheapFuneral
New member
Is ur evo running?
Sneakerfix
New member
They have the same spray pattern as the stock injectors and are fairly cheap was resreaching height seems to be the same