Fearone's SEMA Sonic Build "UltraSonic"

[sx sonic]

it looks........... AMAZING

I'm thinking I want the front a rear fascia. I'd take the car but too much money for me and i'd do it the injustice of not cleaning her enough.

Also glad to hear it did so great at the show

 

[JusticePete]

Congratulations to Mr. T (FEAR ONE) on winning yet another GM design award!

 

[sonicBoom55]

Fearone is an AZ car
where can I see this beauty???
I live in AZ

 

[inm]

I believe Roger said it will be showing up at various shows in the near future.

Not sure if it will be a road car any time soon, mostly a trailer queen. But I could be wrong, honestly.

 

[FEARONE]

I believe Roger said it will be showing up at various shows in the near future.

Not sure if it will be a road car any time soon, mostly a trailer queen. But I could be wrong, honestly.

INM:
Your right on trailer queen to shows outside of my town in AZ. I do my best to keep it pristine looking for all my sponsors. Speaking of sponsors, thank you Pete (Pedders) for the congrat's. Hope next year spend sometime with you at SEMA, but understand on how everyone is so busy.

On a side note (not trying to sell) but I would super highly suggest Pedders to any owner especially Sonic. The handling with Pedders coil-overs is just amazing. I'm not suggesting or even recommending high speed driving, but my friend who is a professional race car driver took my Sonic out for test drive after install (very high speed) and again the handling, cornering, side to side, just blew me away from stock suspension and how the car just seem to stick to the road.

On various shows, I kick off 2013 at C.E.S. in Valor booth. Then in Bridgestone booth at Barrett/Jackson AZ. I'm waiting on Bridgestone confirmation for B/J AZ.

 

[RS Turbo]

Where is all the promised Pics!!!! Any data on the engine modes? Dyno testing?

 

[ThatTmoGuy]

Where is all the promised Pics!!!! Any data on the engine mods? Dyno testing?

I've been thinking the same thing but didn't wan't to be the PITA that said it first lol.

Come on man i want more of this thing! Maybe a nice long video walk around?

 

[inm]

Roger is still waiting on the magazine photoshoot photos to come in, at which point they will be sent to me for you guys.

As for data/dyno stuff, I have no idea currently.

Here's some pics to hold you over until the good ones come in.

 

[ThatTmoGuy]

only two things i don't like about the car
1. Injen- nuff said
2. slush box... to each their own.

 

[theenico]

3. The fake discs over the rear drums.

What size, offset, etc. are the wheels and who makes them?

 

[$ub$onic]

Did I see a jet chip sicker ?

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

 

[Eric Smit]

Did I see a jet chip sicker ?

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

That's number four.


-Eric Smit

 

[$ub$onic]

Maybe they Can tell us if it accily does anything

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

 

[inm]

The wheels are 18" XXR one-offs.
Unsure on the offset.

 

[theenico]

18x?

 

[Preloader]

300 hp on an Injen intake? It'll probably see 325 with the SAB.

 

[$ub$onic]

300hp with a jet chip to

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

 

[Preloader]

Don't get me wrong, the car looks sick, I like the color choices and wheels......... a lot. But other than the custom sub enclosure, wheels and paint, everything else appears to be over the counter bolt-on's.

Shoulda brought the Preloader to SEMA.

 

[Lovehanayo]

Just wanted to jump on and say hi and mention on wheels had a few people emailing me. You can get XXR 527 wheels for Sonic. But only 17"-18" size. Plus you would have to have them re-drilled to 5X105 size & they only offer in chromium black, f-black, gold. The ones I'm doing are a 1-off custom Candy Teal powder coat by Nic-industries. We were also going to add glow in the dark powder with the clear. But after researching further if I did do that look, wheels would look either clear or pale yellow in day time. No way I wanted that look.

Any ways, If wheels are re-drilled correctly then you will have no problems. But if there even slightly off like what happen to us first time. Then can't be fix. Even if you weld holes up & re-drill correctly you will damage the integrity of the wheel. Just thought I passed on in case anyone out there wanted to purchase a set. XXR does not do re-drill. Best of luck and hope information helps....

This is what they said about the wheels for the person that asked about it.

 

[iraqivet]

maybe the fake disk over drums gave made it 300 hp.

dont take me wrong the car looks nice but im kinda let down. its all bolt on other than the paint.

and if it was me the last thing i would do is bring a car to sema with fake disk over drum covers.

maybe next year ill put mine in there same parts and i put l.e.d. washer lights and take first place