FourPlay Wheels (Est. 2015)
- Thread starter TheGreenDragon
- Start date
Song
New member
Hi everyone!
TheGreenDragon: thank you for the explanation, that was very well put! Traditionally, high-offset wheels were limited to flatter designs due to technical limitations. However, we were able take advantage of recent engineering advancements to allow deeper-set designs to create a more concave appearance.
Granted, they can't compare outright to the lower-offset truly concave wheels, but we can only bend the laws of physics so much without breaking them
And to address each person...
TheGreenDragon: no immediate plans for directional wheels in cast, but we are planning to do a dedicated series of directional designs for forged soon.
2014 Blue RS: we will have a wheel builder module up on our website soon where you can play around with the different colors and finishes combinations to visualize, I will let everyone know when that happens!
nickalltogether: you can find a description of FORCED CONCAVE here: Forced Concave ? | FourPlay
TheGreenDragon: thank you for the explanation, that was very well put! Traditionally, high-offset wheels were limited to flatter designs due to technical limitations. However, we were able take advantage of recent engineering advancements to allow deeper-set designs to create a more concave appearance.
Granted, they can't compare outright to the lower-offset truly concave wheels, but we can only bend the laws of physics so much without breaking them
And to address each person...
TheGreenDragon: no immediate plans for directional wheels in cast, but we are planning to do a dedicated series of directional designs for forged soon.
2014 Blue RS: we will have a wheel builder module up on our website soon where you can play around with the different colors and finishes combinations to visualize, I will let everyone know when that happens!
nickalltogether: you can find a description of FORCED CONCAVE here: Forced Concave ? | FourPlay
TheGreenDragon
Dopamine-seeking Missile
What does that mean exactly?
Will a 'dedicated series' have set specifications and thus be slightly cheaper? Or is FourPlay planning to expand their lineup with all-new directional designs exclusive to forged wheels (an FP-20 or FP-25 perhaps)?
Song
New member
Hi TheGreenDragon, sorry for the confusion..
As you can see, we currently have each FourPlay wheel design in both forged and cast.
And we have had feedback from our distributors that some forged customers would like to have designs that not offered in cast for greater differentiation.
So we may consider this in the future
As you can see, we currently have each FourPlay wheel design in both forged and cast.
And we have had feedback from our distributors that some forged customers would like to have designs that not offered in cast for greater differentiation.
So we may consider this in the future
Song
New member
Hi guys!
Just a little update for you: our Wheel Builder module on our site is up and running at Wheel Builder | FourPlay
You can play around with the different colors (pre-set & custom) and finish combinations
caveat: On the Wheel Builder, you can also customize your center caps, but in our existing production runs, we do not have that on offer yet
Hope everyone is having a good Friday!
Just a little update for you: our Wheel Builder module on our site is up and running at Wheel Builder | FourPlay
You can play around with the different colors (pre-set & custom) and finish combinations
caveat: On the Wheel Builder, you can also customize your center caps, but in our existing production runs, we do not have that on offer yet
Hope everyone is having a good Friday!
TheGreenDragon
Dopamine-seeking Missile
That is awesome Song! I could waste a lot of time trying out different combinations!
Just a couple small things I noticed, and wondered if you had the ability to pass on to the programmers in charge of the wheel tool.
1. The black background for the vehicle+wheel view swallows up black wheels and might benefit from being a more neutral grey color (different from any of the grey wheel colors).
2. The black color for the wheels is very, very flat and doesn't show off the wheel's surface details. It's more like a very intense shadow right now.
Other than that, it's awesome!
Just a couple small things I noticed, and wondered if you had the ability to pass on to the programmers in charge of the wheel tool.
1. The black background for the vehicle+wheel view swallows up black wheels and might benefit from being a more neutral grey color (different from any of the grey wheel colors).
2. The black color for the wheels is very, very flat and doesn't show off the wheel's surface details. It's more like a very intense shadow right now.
Other than that, it's awesome!
Song
New member
Hi folks! Been a while, but thought I'd drop in here to update everyone that our production run is to be done by estimated 30th June.
While we usually sell through our wholesalers and distributors, we would like to also extend the invite to purchase directly to end-users such as yourselves who have been so supportive of our efforts thus far.
To that effect, here is the link to our direct sales stock list : https://www.dropbox.com/s/th0gj4bhi9ctbik/FourPlay Production List 30 June.xlsx?dl=0
All prices are per wheel and are inclusive of direct-to-door shipment
I look forward to hearing your thoughts on this, and answering any questions you might have!
Song.
While we usually sell through our wholesalers and distributors, we would like to also extend the invite to purchase directly to end-users such as yourselves who have been so supportive of our efforts thus far.
To that effect, here is the link to our direct sales stock list : https://www.dropbox.com/s/th0gj4bhi9ctbik/FourPlay Production List 30 June.xlsx?dl=0
All prices are per wheel and are inclusive of direct-to-door shipment
I look forward to hearing your thoughts on this, and answering any questions you might have!
Song.