macncheese
New member

REPLACE THIS.

WITH THIS.
Was snooping around in other country's OEM websites and noticed there is a sunglass holder where the grab handle is. Being that I never use the grab handle on in the driver's position, I tracked down the sunglass holder from an overseas supplier. Now that I have the part # (shown) maybe it is available in the US, I haven't checked. Anyway, it's pretty straight forward install but here we go:

STEP 0.
Buy This.

STEP 1.
Open this little cover with a screwdriver (x2).

STEP 2.
Remove this bolt with an 8mm socket (x2).

STEP 3.
Pull! There are two push in connectors (christmas trees) that will pull out.

STEP 3.1.
Notice the new piece has them too.

STEP 4.
Install new bolts with 8mm socket and close the covers.

STEP 5.
Put your sunglasses in there so your GF doesn't sit on them.
Fits pretty well but doesn't sit totally flat in the front upper corner on my car because of the sunroof. You can see this in the first picture. Would probably sit flush on a non sunroof car.