Lamp Specs

[Wolfman213]

I'm looking into replacing some exterior bulbs; currently the fogs and backups. Looking at Diode Dynamics, they essential have options for standard, brighter, and brightest. Sizes tend to vary on them, especially on the brightest. Has anyone measured the interior dimensions of the lamp housings or know of where to find the exact specs for the lamps?

 

[OssiansFolly]

I ordered these for my reverse lights, and I don't have fog lights but my understanding in all the reading I've done replacing all my bulbs to LED is to make sure you get projection bulbs for fog lights.

 

[Wolfman213]

Nice! Have they made a noticeable improvement when backing up both in the rear camera as well as simply looking out back? I noticed a lot of questions on that one concerning the bulb staying on; I'm assuming you haven't had those issues correct?

 

[Calorim]

I'll have to take some pictures of my car, but I have these LED's installed for my fogs, reverse, dome, interior and license plate. I will be ordering brake LED's, turn signals and headlights in April. I will update this thread with links and pictures.

Fogs
Reverse
Dome
Interior/License

 

[OssiansFolly]

I haven’t had issues with the lights cutting out or anything like that. I don’t have a reverse camera, but it is noticeably brighter when I look over my shoulder.

 

[Wolfman213]

I'll have to take some pictures of my car, but I have these LED's installed for my fogs, reverse, dome, interior and license plate. I will be ordering brake LED's, turn signals and headlights in April. I will update this thread with links and pictures.

Fogs
Reverse
Dome
Interior/License

I'm going to look into those fogs. I was looking at ones from DiodeDynamics, but $90 for the pair, which I'm sure they are worth it, is a little steep for me right now. Did you need a CANBUS adapter for them?

 

[Wolfman213]

I haven’t had issues with the lights cutting out or anything like that. I don’t have a reverse camera, but it is noticeably brighter when I look over my shoulder.

I ended up ordering those that you had mentioned for me as well as my wife's 2016 Cruze and it was a great investment! I have definitely noticed an improvement when backing up.

 

[Calorim]

I'm going to look into those fogs. I was looking at ones from DiodeDynamics, but $90 for the pair, which I'm sure they are worth it, is a little steep for me right now. Did you need a CANBUS adapter for them?

No I did not need a CANBUS adapter for them and I do not get any codes or warnings.

Sent from my Pixel 2 using Tapatalk

 

[Calorim]

I just replaced my low and high beams. I went with these. They are bright but have a nice cutoff in the 2017 housings. They are a little blue I would have preferred 6000k color but it's hard to find that color. These LEDs do fit in the stock housing with the dust cap installed.

BEAMTECH 9005 LED https://www.amazon.com/dp/B072JC755L

BEAMTECH H11 LED https://www.amazon.com/dp/B071SHJ5X3

Sorry I have been really busy and didn't post any pictures yet. If it's nice out tomorrow evening I'll grab some pictures and post them.

Sent from my Pixel 2 using Tapatalk

 

[Calorim]

I'm going to look into those fogs. I was looking at ones from DiodeDynamics, but $90 for the pair, which I'm sure they are worth it, is a little steep for me right now. Did you need a CANBUS adapter for them?

Hey Wolfman, sorry somehow when I looked up the lights from my amazon order it sent me to the wrong item. The first time I liked the fogs was to the wrong item. I now corrected the fog light link. Our fogs are PSX24W 2504 bulbs. Sorry for that.

 

[Wolfman213]

Hey Wolfman, sorry somehow when I looked up the lights from my amazon order it sent me to the wrong item. The first time I liked the fogs was to the wrong item. I now corrected the fog light link. Our fogs are PSX24W 2504 bulbs. Sorry for that.

And people tell me procrastinating is bad... HA! Thanks for the update and I am actually going to order them today!