Lashway custom CAI for Sonic Turbo - Version 1.0

[sx sonic]

Second on the downpipe, do you have an e.t.a. on that product

-tyler

 

[sonic hotness]

Third for the downpipe.

Interested in the CAI also..

Interested to see some tune numbers also.

Wish you guys were closer

 

[slitzell]

I'm very interested in a catless downpipe.


-Eric Smit

Agreed. Def want a catless downpipe at a more affordable price!

 

[Eric Smit]

Not necessarily more affordable, just cheaper. The ZZP is affordable.


-Eric Smit

 

[Lashway]

we will try our best on the downpipe guys, remember our mandrel bender cost 35K+, it makes it hard to sell cheap stuff! haha

 

[Eric Smit]

I'm not hoping for $100, but $250 would be better than $270.


-Eric Smit

 

[rdss]

we will try our best on the downpipe guys, remember our mandrel bender cost 35K+, it makes it hard to sell cheap stuff! haha

You're not paying for it with just Sonic 1.4 down pipe sales are you?! If you can get a nice HB and sedan exhaust, mid pipe the down pipe added that will help make those payments on that machine as well. I'm looking forward to seeing what y'all bring to the market!

 

[Eric Smit]

You could raise the price of everything $20 and give the downpipe away for free.


-Eric Smit

 

[sonic hotness]

Lol


Interested to see a true cold air intake also

 

[Eric Smit]

-Eric Smit

 

[sonic hotness]

Lol epic

 

[Lashway]

HAHAH

Nice one Eric!

 

[Lashway]

Hey folks, Erik@Lashway here (the other half of Lashway) and the guy who uses proper punctuation (ahem, Josh) haha.

We're working our asses off to get new products out as soon as possible.

We will refrain from posting dead set pricing, and info until the products are tested, and driven.

What we can tell you is that we're a large performance shop with more than a decade's worth of fab experience, and product do's and don'ts. Also keep in mind that production costs are sometimes a limiting factor in what we can, and cannot build. We have many many ideas in the pot. Just have to see which ones pan out.

We appreciate all of the buzz and interest in our arrival! We will not disappoint.

 

[Lashway]

Third for the downpipe.

Interested in the CAI also..

Interested to see some tune numbers also.

Wish you guys were closer

We are going to run a baseline on our hatch sometime this week. We will then install the intake, and run the car again untuned. We will then retune with HP Tuners, and see what we gain! I am PUMPED.

After this is perfected, and we introduce the intake and tune to the world, we will then move onto exhaust, and other parts which make power! No ETA, but first on the list!

 

[Preloader]

-Eric Smit

I just lost.

 

[Eric Smit]

I just lost.

Score!

Lashway, we're always excited for new aftermarket support. Thanks for bringing our car to your attention.


-Eric Smit

 

[Graham]

Yeah a turbo back exhaust might be a nice option for those of us looking to do the exhaust side all in one fair swoop!

 

[Graham]

Just an idea ... If your working on the downpipe, might as well keep going all the way out the back right? It seems there's a lot of opportunity to make it competitively affordable combining the downpipe with a exhaust system.

 

[Lashway]

Just an idea ... If your working on the downpipe, might as well keep going all the way out the back right? It seems there's a lot of opportunity to make it competitively affordable combining the downpipe with a exhaust system.

Yup!

E

 

[jim97regalgs]

Hey guys. First of let me say the guys at lashway are a great group guy, and deff know there stuff. the sonic 1.4t hb they are fabricating and testing the intake on is my sonic. I have known josh for a long time now and when they found out i had a sonic 1.4t the went :banana:.:banana:. lol. I have never seen a group of guys so excited about working on a car. lol. I am excited to get the finished product on the car so we can get some dyno numbers and real world testing. . And i cant wait for them to start working on the dp and exhaust.