P015b CEL??

[emorejnayr]

So i got my new tune yesterday and installed everything last night (bov,intake, injectors,tune). Today while driving around i got a CEL that was a P015B, I googled and found its a O2 Sensor Delayed Response - Lean to Rich. If this due to the new injectors not being in right or is there a bigger issue that im missing? I also noticed im going through a ton of gas, that could be because im boosting to hear the bov though . Any help/insight on this would be awsome.

PS: I'm running a 93 octane tune because i still had a full take of gas last night. Corn will be this week though:bananaif i dont have a serious problem that is )

 

[Eric Smit]

you're burning through gas because you have a heavy right foot combined with injectors that flow 50% more. .


-Eric Smit

 

[emorejnayr]

I figured that was the cause for the gas depletion but i just didnt know if that was due to the injectors not being seated right. Any thoughts on the trouble code?

 

[Eric Smit]

that code is being thrown because there is WAY more fuel coming out of your exhaust, which is confusing the sensor. I bet nothing is wrong. clear the code, go E85, and see if it goes away.


-Eric Smit

 

[$ub$onic]

If the Injectors were not seated right, you would have found that out when you started the engine

 

[emorejnayr]

Ok, thanks Eric!

 

[emorejnayr]

I am assuming you mean there would have been gas everywhere.

 

[$ub$onic]

Yes

 

[Eric Smit]

keep in mind, I'm no trained professional, but that is what I would do. no problem.


-Eric Smit

 

[Luv2xlr8]

Just got this code and I cleared it, let's see if it comes back again

 

[texsprsonic]

I installed my zzp header and midpipe and CEL eliminator and now its throwing the p015b code. anybody know of the fix for it?