Round 2: Spherical Front TCAB Interest

[Italianjoe1]

Bushings are in the arms, just need to cut the small spacers, should be ready to go out on Monday or Tuesday.

Only had 3 deposits, did 4 sets of arms, so if anyone else wants to get in, you can.

 

[wasteoffilm]

I'm in if still available.

I assume this close to shipping date you want full payment? I'm good either way. Reply, PM or email wasteoffilm at hotmail

 

[Italianjoe1]

They're all ready to go guys, I got the last spacers made up today.

Paypal to Italianjoe1@hotmail.com, let's call it $330 shipped, most of them were around $40 to ship last time, if it's a couple bucks i'll take care of it. If you send it paypal and not as a gift, add $10 for the paypal fees please. Obv you guys with deposits in, deduct the $50 from that number.

 

[Italianjoe1]

I'm in if still available.

I assume this close to shipping date you want full payment? I'm good either way. Reply, PM or email wasteoffilm at hotmail

Still have one set that's not spoken for, so if you want them, as soon as I have the money I'll send them out to you. Thanks.

If anybody needs to reach me for whatever reason, 305-975-4570, text me, i'll see it before I will a message on here but I'll check back often until these are paid/shipped.

 

[wasteoffilm]

Done.

 

[Italianjoe1]

And the extra set is already gone. That was quick. Thanks Joe!

 

[Italianjoe1]

Two sets shipped out today, thanks guys.

 

[2014 Blue RS]

So 330 minus the 50 deposit. Confirming before sending payment

Sent from my SM-G950U using Tapatalk

 

[Italianjoe1]

So 330 minus the 50 deposit. Confirming before sending payment

Sent from my SM-G950U using Tapatalk

Yep

 

[CorradoKev]

View attachment 13984

They're all ready to go guys, I got the last spacers made up today.

Paypal to Italianjoe1@hotmail.com, let's call it $330 shipped, most of them were around $40 to ship last time, if it's a couple bucks i'll take care of it. If you send it paypal and not as a gift, add $10 for the paypal fees please. Obv you guys with deposits in, deduct the $50 from that number.

Payment sent! Thanks again ItalianJoe1!

 

[wasteoffilm]

Product arrived today, thanks!

 

[Italianjoe1]

All gone guys, thanks a ton, let me know how they are once you get them on the car.

 

[wasteoffilm]

Will probably be a while for me, still snowing up here, no garage. Need to do the pcv fix first, and looking at the DRS mount...

 

[CorradoKev]

All gone guys, thanks a ton, let me know how they are once you get them on the car.

Just got these installed today and the difference is truly night and day. I had to actually readjust my driving style as the immediacy with which the car changes directions now requires a slower movement of the wheel. I didn’t notice any additional noise in the car, however, I haven’t been able to get up to highway speed yet with today’s Miami traffic. Thank you again Joe for bringing this product to market. Every Sonic should have these control arms!

 

[Italianjoe1]

Thank you Kev, always nice to meet a local guy too.

From my Cobalt experience with these joints, there's basically no downside. The only "noise" you get is additional road feedback transmitted to the steering/body, it's not as luxurious but the sonic isn't exactly a luxury car to begin with. That bushing is a major source of slack in the front suspension, it's almost a half inch bigger than the Cobalt one, so that's even more rubber to move around when you are placing a load on it.

 

[TurtleOverlord]

As a note for the future, the ball joint presses that napa and autozone rent are not big enough to press our bushings.
I tried both of those and ended up taking it to a shop.

I don't know why csmans.com told me I needed to take the tie rod out, but I did it just fine without removing it.

And damn, these bolts are tight!

 

[4Flattires]

Still in Business?

http://www.sonicownersforum.com/forum/members/italianjoe1.html

Joe,

Are your still doing these? If not, could you PM me the recipe so that I can bake my own?

 

[YouBeTailsIllBeSonic]

http://www.sonicownersforum.com/forum/members/italianjoe1.html

Joe,

Are your still doing these? If not, could you PM me the recipe so that I can bake my own?

X2

Sent from my SM-A520W using Tapatalk

 

[Italianjoe1]

http://www.sonicownersforum.com/forum/members/italianjoe1.html

Joe,

Are your still doing these? If not, could you PM me the recipe so that I can bake my own?

Haven't had any demand for them, if there's a couple that want them, I could do another batch.

 

[mcanderson0]

Bump... Any current interest?

EDIT: I'll get 2 pairs for both my Sonics... So maybe we'll only need a few more takers?