Trim/interior parts Removal

[doreo]

Sem paint and later dip

Sent from my SPH-L710 using Tapatalk 2

 

[bandita52]

I plan on looking at this when i do my interior for when i install some red/black carbon fiber vinyl on my doors and parts of my center console so i get it evenly around.

 

[eddundon14]

Question about vent trim

I'm really having trouble with the trim around the ac vent. I can't get the peice to snap back in

 

[savegejon123]

I believe its labeled "right" and "left" or something like that. It wont go in upside down.

 

[doreo]

remember they angle up (i think lol) and they contour to the trim piece so there is only one way for them to go in.

 

[eddundon14]

Thanks! And the ac vent is loose

 

[doreo]

Check its on right should be snug

Sent from my SPH-L710 using Tapatalk 2

 

[doreo]

maybe the mods could sticky this or make a post with the info so people stop asking how u remove trim part a or b.

 

[FamousSonic420]

So when I take off my passenger side plastic.( the ****ty grey on the dash). Which harness is for the airbag? Which one should I unplug before pulling my plastics up? Is it yellow?

 

[doreo]

Yup pull back the red clip them it should squeeze off

Sent from my SPH-L710 using Tapatalk 2

 

[FamousSonic420]

One more thing. The 2 screws u r talking about. R they the ones u can see in my picture?

 

[FamousSonic420]

Can I do all this with my battery still plugged in?

 

[doreo]

One more thing. The 2 screws u r talking about. R they the ones u can see in my picture?

yup the ones on the right and left edges.

and i do it with my battery connected, but if you are worried you can disconnect.

 

[FamousSonic420]

I got my dash all off with no problems. Putting it back in was a little bit of a pain but no too bad at all. Thanks alot for all ur tips and answers

 

[doreo]

Np glad some people are finding this now

Sent from my SPH-L710 using Tapatalk 2

 

[simple2me]

Done mine this morning. Pretty easy. The radio cover was the hardest thing to remove. I have to finish the back doors and steering wheel and I'll be done. I'm going to make a gauge pod of fiberglass for the center piece up top. I'm thinking 3 gauges, maybe 4. I gotta pick up some fiberglass clothe and build a wire frame to get my shape.

[/URL][/IMG]

 

[KartRacer]

Done mine this morning. Pretty easy. The radio cover was the hardest thing to remove. I have to finish the back doors and steering wheel and I'll be done. I'm going to make a gauge pod of fiberglass for the center piece up top. I'm thinking 3 gauges, maybe 4. I gotta pick up some fiberglass clothe and build a wire frame to get my shape.

[/URL][/IMG]

I like the look but don't have the kahoonas to do this upgrade.
For my curiosity what did you use for paint?

 

[simple2me]

I used the Dupli-Color vinyl/plastic/fabric paint. The red matched pretty good. Another upgrade I'd like to do is the center radio piece a/c vents. I want to put 2 of the round vents in the center.

 

[rodslinger]

How to remove the side vents?

I need to remove one of my side vents and not sure I'm following your info correctly. Do the round side vents just pop out or are they secured on the backside with a screw or clip that has to be disengaged after removing the side trim?

I started to just pull one out and it came about 1/2" off the dash and felt like it locked. Seemed an inappropriate amount of force needed to pull it all the way out so I stopped before destroying something and pushed it back into place.

 

[KBlanchette21]

Thank you for posting this! My center hub is shiny af and it blinds me while driving. I'm gonna remove all the shiny parts and paint them either matte body color or... something not shiny I don't know yet.