zippy's build

[sonic24740]

This came in the mail today... But still need to send in a tune and still trying to figure out whats the deal with my afr guage sending emails back and forth to innovate to try an figure it out..



Also i have found that summit seems to be the cheapest place to find this stuff. everyone else wants 30.00 or more to ship they were 9.99. no one local for me carrys it or any other premix junk..

 

[Preloader]

 

[RSTURBO]

How did u make out with tuning the meth kit?

 

[sonic24740]

That will also work. And you could talk to trifecta about running that signal to the ECM for logging, then putting it back to your gauge after you've logged.

The options are plentiful.

How did u make out with tuning the meth kit?

Just waiting on my first retune for it.. I am onpy home about one day a week so took me a while to get the log and send in the tune.. its been a week and with the holiday.. so I expect it anyday now

I will post up once I get it straight..
..

 

[sonic24740]

well no good news.. still waiting for a retune.. i guess i sent it in to close to there vacation.. they just got back in there today.. so hope to get it by next week..

On another note.. I just got some green giants.. should have them middle of next week also..

I am moving along.. just very slowly..

 

[sonic24740]

O my...

I just got am updated tune for my water/meth...

If only i was home now...will be installing tune on sunday when i get home

:banana::banana:

 

[rdss]

Nice! Looking forward to your review of the updated tune.

 

[sonic24740]

well installed the updated tune.. WTF umm yea it feels like i have lost power.. so I am going to do a log later tonight and send it in and see what they say.. really depressing...

 

[rcmn0022]

How do you have the wideband wired into the car so that Vince can log it?

 

[sonic24740]

How do you have the wideband wired into the car so that Vince can log it?

i installed per the instructions took the yellow analog 1 wire from the lc1 to ecm of car. Don't remember what wire that was off the 02 connector. but its the signal wire. this kit sends out two signals a narrow and a wideband.

 

[rcmn0022]

Thanks, I'm putting in the innovative mtx-l and it has the same outputs as the lc1. But do you have the narrow band hooked in or do you have the full wideband signal going to the ecm and Vince was able to change it to read it?

 

[sonic24740]

Thanks, I'm putting in the innovative mtx-l and it has the same outputs as the lc1. But do you have the narrow band hooked in or do you have the full wideband signal going to the ecm and Vince was able to change it to read it?

i have the narrow band going into the ecm..

But i was told that vince can change it and you can have the wideband going into the ecm instead.
preloader told me this.

And an update.. the smaller nozzle i had installed was too small I had to install a larger one.. the water/meth kit comes with two..
I have sent in an updated log about a week ago just waiting for a response..

This is my next install after i find out the tune is good.
big green injectors ..... i am on the road and have no pic of them..

 

[sonic24740]

Well i have finished my redoing of the plati dip into real paint.. the only thing trim pieces i have left are the door window chrome. I will just be ordering the black trim for that and replace it..

Also the lower grill up top has a plastic back plate to it.. I took it off.. I think i looks so much better.. but did expose some of the paper thin bumper.. was thinking about cutting it out would allow more air flow.. but i decided at this time i would just paint it black to hide it..

while i had the bumper and headlight off i got some spray tint.. and did the turn signals.. didn't turn out as good as i wanted..

Its actually rather dark... darker then i wanted it.. but i turn the signals on and they are still visible..one thing with this stuff is when it dries its darker then wet.. so be careful when doing this..

 

[Insanika]

This picture...OMG.

So much badass in that. I love the look of the dark corners, it just makes it look ANGRY!

 

[sonic24740]

so got theses were here when i got home..

i installed the door sill plates..



my photos blow for some reason.. probably due to it was getting dark..
also got this in the mail will be taking it to a shop to weld it.. i dont have the proper welder to do it..

 

[Preloader]

Whoa. WhoWhatWhere? Is it custom for the RS or off the shelf? Gonna look slick.

 

[Insanika]

Looks like ZZPs RS tip.

 

[sonic24740]

Whoa. WhoWhatWhere? Is it custom for the RS or off the shelf? Gonna look slick.

yes its the rs tip..

its there custom tip..

the welding of this stuff is amazing...

got if from zzp.. to replace my single tip...

 

[RevCivic]

Haha I got those same sills, and i had those little red backings for the 3m tape all over the back of my sonic. have you noticed that they tend to make a little scraping noise if they take any pressure on them?

 

[rcmn0022]

yes its the rs tip..

its there custom tip..

the welding of this stuff is amazing...

got if from zzp.. to replace my single tip...

Out of curiosity what is the diameter of each of the tips?