Front plate relocation

[barch88]

I wanna put it lower - looks like there are 4 taps that is gonna leave 4 holes in my bumper - anyone relocate their plate?


Sent from my iPhone using Tapatalk

 

[AdorableKaren]

Yeah I relocated mine under the car

 

[sx sonic]

Yeah I relocated mine under the car

Yours plays hide and seek lol.

 

[sx sonic]

Oh and Preloader moved his. There's two holes in the stash you'll need to cover up with plugs.

 

[barch88]

2 holes aren't a huge deal but I saw 4 taps so I thought there are gonna be 4


Sent from my iPhone using Tapatalk

 

[River_Rat]

2 holes aren't a huge deal but I saw 4 taps so I thought there are gonna be 4


Sent from my iPhone using Tapatalk

There's definitely 4 holes where my plate bracket used to be.

 

[barch88]

There's definitely 4 holes where my plate bracket used to be.

Can u post a pic of the holes? I wanna see how bad it is before I do it


Sent from my iPhone using Tapatalk

 

[River_Rat]

 

[barch88]

That's not bad at all. So did you just pry off the plastic screw things and then buy those to fill the holes?


Sent from my iPhone using Tapatalk

 

[River_Rat]

You have to drill them out. They are aluminum (or some soft alloy) rivets. Just find a bit slightly larger than the hole in the center of the rivet and drill the head off of them. You will want to use light pressure as they are really soft and you will punch through if not careful. And yeah, just buy the appropriate size body panel retainers at your local auto parts store. It's hardly noticeable.

 

[barch88]

Thanks for the heads up I was about to go pry them off and probably destroy my number lol


Sent from my iPhone using Tapatalk

 

[barch88]

Bumper


Sent from my iPhone using Tapatalk

 

[River_Rat]

No problem. I'm glad you read the reply before cracking your 'stache all to hell.

 

[rcmn0022]

No problem. I'm glad you read the reply before cracking your 'stache all to hell.

If you cracked the 'stache then it would have been a good excuse to getrid of it and make the front look even cleaner.

 

[barch88]

I got it done thanks guys


Sent from my iPhone using Tapatalk

 

[River_Rat]

Pics?

 

[Beastlick]

Pic is a little grainy but I made some spacers out of 3/4" plastic rod and bolted through the fog bezel (I have an LT and no fogs) I will be adding a true CAI from the left side in the spring. Just an option.

 

[fletch]

would be nice not to have a front plate but it seems if your car cost over 35k you don't have too,

 

[Preloader]

This:

 

[barch88]

I may move it a bit higher



Sent from my iPhone using Tapatalk