Maharsi's build

[Maharsi]

Hey,

There's two more pics, Markizio, if you wanted to see in more detail the tint. Sry my car isn't perfectly clean atm.

Later

 

[Maharsi]

Hi everyone!

I'm posting 2 more pics of my car which is now pedderised! The handling is very good now, and i'm very happy with that. (also a third one to compare before/after... hehe)
I find that the "sound/feeling" of the rear CO in bumps and cracks not as stiff as i would like to... It feels that somethings is slack or smth... Any of you experienced that? The coils are stiff and answer well the road since I'm using an 5kg/mm rear coil.
I also want to lift back a lil the rear because i find the undercar at risk of damage... Some1 know any way to protect it agains rock and bump? the car sit only on the coils and "rubber" (see picture) since the height ajustement part is to large and can't lower the car enough...I wish i can install only the red piece and not the whole part. I would like to get it higher for around 0,5" inch. (see thread here :http://www.sonicownersforum.com/forum/pedders-usa/7383-pedders-rear-coil-3.html)

It look very nice that low tho... If only we had good road like US have!

 

[Black Turbo LTZ]

Nice to see I'm not the only lowered Black sonic in Montreal!!!!!!!!! nice ride man

 

[Maharsi]

Thanks Black turbo! Did you protect your under-car with something or only try to avoid our ostrich pot-hole? Actually i'm in trois-rivières... altho i lived 10 years in Montreal! Tuesday I will go add at least the red part of the rear height ajustement. I might do as opticon did and cut a part of the height ajustment and put 1 spacer... I have no choice cause of quality of the road.. and also my girlfriend doesn't like much to be looked at every corner ... it seems that height is eyes magnet haha

 

[Black Turbo LTZ]

Thanks Black turbo! Did you protect your under-car with something or only try to avoid our ostrich pot-hole? Actually i'm in trois-rivières... altho i lived 10 years in Montreal! Tuesday I will go add at least the red part of the rear height ajustement. I might do as opticon did and cut a part of the height ajustment and put 1 spacer... I have no choice cause of quality of the road.. and also my girlfriend doesn't like much to be looked at every corner ... it seems that height is eyes magnet haha

Getting rust proofed this summer, I'm in rigaud(near the QC/ONT border) We should meet up and do a photoshoot maybe in old montreal or somewhere near water.