Planning my timing belt change on my 2013

6

68bugonair

Member
rojoes said:
I spoke with a service at a local dealer, they said tech 2 code reader will clear it....They also said any OBD code reader should clear it
Click to expand...
I just tried several times with my actron pocket scan. No success

Sent from my SPH-L710 using Tapatalk
 
6

68bugonair

Member
Went to advance and used their elite scan tool. Still didnt work, did see the option to turn off the oil indicator light. Maybe the dealer thought you were refer to code 82 not 52.

Sent from my SPH-L710 using Tapatalk
 
R

rojoes

Member
68bugonair said:
Tried the oil option too.. nada.. just to be thorough

Sent from my SPH-L710 using Tapatalk
Click to expand...

http://www.fixya.com/support/t25453828-reset_timing_belt_warning_light_2012
Click menu on the turn signal lever to the left of the steering column until the Vehicle information menu appears. Scroll thru the screens by rotating the lever a few times until the replace timing belt item is displayed. Press and hold the set button on the end of the lever. It will ask are you sure you want to reset? Rotate the lever to select yes and hit the select button again to confirm. Make sure you have changed your timing belt before resetting this. Severe engine damage may occur if the timing belt is not changed on a regular schedule.
 
Last edited:
6

68bugonair

Member
rojoes said:
SOLVED: Reset timing belt warning light 2012 cruze - Fixya
Click menu on the turn signal lever to the left of the steering column until the Vehicle information menu appears. Scroll thru the screens by rotating the lever a few times until the replace timing belt item is displayed. Press and hold the set button on the end of the lever. It will ask are you sure you want to reset? Rotate the lever to select yes and hit the select button again to confirm. Make sure you have changed your timing belt before resetting this. Severe engine damage may occur if the timing belt is not changed on a regular schedule.
Click to expand...

tried the oil option as in to clear the timing code. i know how to clear the oil code
 
6

68bugonair

Member
There is no replace timing belt item in the menu. Called a couple of dealerships they want between 80 and 160 to reset it. Was told a number of different bs answers too. Even pump the gas four times and then hold it. By jeff at the Alexandria dealership. And of course they wont let you speak to a mechanic cause they suck.

Sent from my SPH-L710 using Tapatalk
 
6

68bugonair

Member
Huh? Flash doesn't work on my phone. But that looks like a link to the owners manual again

Sent from my SPH-L710 using Tapatalk
 
R

rojoes

Member
68bugonair said:
Huh? Flash doesn't work on my phone. But that looks like a link to the owners manual again

Sent from my SPH-L710 using Tapatalk
Click to expand...
Page 5-25

Vehicle Messages
DIC messages display when the
status of the vehicle has changed
and action may be needed to
correct the condition. Multiple
messages appear one after another.
Press any of the DIC buttons on the
turn signal lever to acknowledge
and clear them from the display.
More urgent messages cannot be
cleared from the DIC display. All
messages should be taken
seriously. Clearing messages will
not correct the problem.
Vehicle messages appear as code
numbers.
15: Center High Mounted Brake
Lamp Failure
16: Service Brake Lamps
21: Left Front Position Lamp
Failure
22: Right Front Position Lamp
Failure
23: Reversing Lamp Failure
24: License Plate Lamp Failure
25: Left Front Turn Indicator Failure
26: Left Rear Turn Indicator Failure
27: Right Front Turn Indicator
Failure
28: Right Rear Turn Indicator
Failure
52: Change Timing Belt
82: Change Engine Oil Soon
84: Engine Power Is Reduced
89: Service Vehicle Soon


oh well
 
6

68bugonair

Member
Exactly. Older cars you had to flip a switch behind the cluster to turn it off... just have to figure this out. There is no way im spending 80 at the dealer to have them turn it off

Sent from my SPH-L710 using Tapatalk
 
$ub$onic

$ub$onic

The Sticker Guy
It should be literally pressing and holding the reset of button for 10-15 seconds

Sent from my S60 using Tapatalk
 
6

68bugonair

Member
****SOLUTION ****** Remove all 3 fuses for instrument panel and. Wait 3mins and the replace.

Sent from my SPH-L710 using Tapatalk
 
You must log in or register to reply here.

Latest posts

Members online

Total: 231 (members: 2, guests: 229)

Share this page

Top