sonix13
New member
Greatly appreciated!
Turbo II
- Thread starter AndrewGS
- Start date
Greatly appreciated!
AndrewGS
Ultimo Hombre
Well, I had the LEDs sitting here and I was bored so I went ahead and installed the tail/brake and rear signal bulbs. I'm awaiting a bunch more that are on backorder until the end of the month.
Here's where I located my resistors for the rear signals.
And a cute little video comparing LED to incandescent.
Next week I order the wheels.
Here's where I located my resistors for the rear signals.
And a cute little video comparing LED to incandescent.
Next week I order the wheels.
AndrewGS
Ultimo Hombre
Yesterday I went to order the wheels and after going over the specs with someone at MHT they said they'd have to run it by the lead engineer who was out golfing for the day. Well, he called my wheel guy today and gave us the green light, so tomorrow I give them the green.
I just hope they look as good in the metal as they do in the brain. There's no turning back.
I just hope they look as good in the metal as they do in the brain. There's no turning back.
Brad Ferrell
New member
The suspense is killing me. Something like this?
Stew
Sedans Rule!
The suspense is killing me. Something like this?
This guy needs to do a big brake upgrade.
Brad Ferrell
New member
18 or 19 inches?
AndrewGS
Ultimo Hombre
I just ordered Eibachs and SS sway bar links.
Yesterday I ordered an RS fog lamp assembly in hopes of getting my PIAA LEDs to work while sealing the assemblies. The LED bulbs are large and have fans that require some room for airflow.
The rest of my VLEDS order should be here tomorrow and I'll get those installed.
EDIT: I forgot to add that these are here. I've got to get them chromed and find center caps.
Yesterday I ordered an RS fog lamp assembly in hopes of getting my PIAA LEDs to work while sealing the assemblies. The LED bulbs are large and have fans that require some room for airflow.
The rest of my VLEDS order should be here tomorrow and I'll get those installed.
EDIT: I forgot to add that these are here. I've got to get them chromed and find center caps.
Last edited:
AndrewGS
Ultimo Hombre
AndrewGS
Ultimo Hombre
Got the rear-end fully converted as well.
Links:
Tail/Brake
Signal
Reverse
Side Marker
License Plate
Links:
Tail/Brake
Signal
Reverse
Side Marker
License Plate
AndrewGS
Ultimo Hombre
Yeah. I've though about polishing and powdercoating them clear, but that would probably end up being more expensive and I'd never be able to get center caps that really match. They are basically brand new 20 year old wheels and look great, but I'm going to have them plated.
Sneakerfix
New member
Polish them then clear them Comes out cheaper then plating them. Saw's have always looked nice they just don't clear a lot of Brake set ups.
Also did you get the 8.5's?
Also did you get the 8.5's?
