Trevinator
New member
I received my anaconda in the mail last Thursday and installed it the same night. the two hardest part were getting that hidden nut off(which is much easier when the intercooler line is removed) and getting the heavy duty clamp on while the exhaust flange is lined up.
must have taken about 10 tries to get it lined up properly. I kept thinking to myself, if only the bolt was a 1/4" longer! but its on and I can hear the turbo much clearer now. the jump in performance after I installed the elite tune to accommodate the anaconda and intake is night and day when my car is actually making boost.
it doesn't want to hold boost through the rev range and sometimes wont build over 11-12 psi at full throttle, but this was happening before all the mods. I just never thought anything of it till now, the lack of boost is much more noticeable now.
you have a great intake and exhaust Walker! I absolutely love it!
must have taken about 10 tries to get it lined up properly. I kept thinking to myself, if only the bolt was a 1/4" longer! but its on and I can hear the turbo much clearer now. the jump in performance after I installed the elite tune to accommodate the anaconda and intake is night and day when my car is actually making boost.
it doesn't want to hold boost through the rev range and sometimes wont build over 11-12 psi at full throttle, but this was happening before all the mods. I just never thought anything of it till now, the lack of boost is much more noticeable now.
you have a great intake and exhaust Walker! I absolutely love it!