DDM Looking for 1.8 Owners to Build Intake!

[Eric Smit]

I like it... is the ddm spark cover new?
And y using uni filter ?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Probably because it's red.


-Eric Smit

 

[rdss]

And JDM!!lol I'm leaning towards it matches as well.

 

[$ub$onic]

I knew they made a cover for the 1.4 but I dident know for the 1.8

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

 

[rdss]

I'm sure we might see more than just the intake come from the 1.8 trip to DDM......

 

[Eric Smit]

is there a difference?


-Eric Smit

 

[rdss]

For the valve covers coil pack cover?! Sure is. Is the gap the same? Maybe, probably not though... The valve cover themselves are not the same.

 

[Eric Smit]

and now I've filled my daily learning requirement. ;P


-Eric Smit

 

[rdss]

I think you have exceeded that limit! You used a grinder that isn't battery powered for grinding the intake manifold damns and it only took you a 1/4 of the time start to finish to get the job done. You might need to take a break for a few days....

 

[$ub$onic]

Lol. How big of a difference does that make
?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

 

[rdss]

He had to wait for it to charge because it was pretty much dead. If he would have prepped he might have had zero problems.... Plug the drimmel into the wall and it never needs a charge.

 

[$ub$onic]

I mean the intake does porting it make a large diff

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

 

[rdss]

Yeah, Eric was quite I impressed.

 

[$ub$onic]

Would it make a diff on the 1.8

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

 

[Eric Smit]

If the 1.8's runners are equally as restricted, I'd expect equal percentage gains.


-Eric Smit

 

[rdss]

I have no clue. You would have to talk to Vince or Jerry to see if Trifecta would even want to do the tuning for it. Then you would have to pull the manifold to see if the 1.8 even has them.

Plus what Eric said...

 

[$ub$onic]

That's true. I wouldn't Think u need a retune though

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

 

[Eric Smit]

Plus what rdss said. ;P


-Eric Smit

 

[rdss]

That's true. I wouldn't Think u need a retune though

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

You may or may not, if not and you could run on stock tuning I'm sure you would get the most out of the removal with a tune though. It all comes back to the stock ECM tuning down, would it be worth pulling apart your manifold, grinding the piss out of it and putting it back on for a day of more power?! That's why I would recommend talking with Vince.

Plus, what Eric said...

 

[DevilSonic89]

My Reaction to prototype DDMworks 1.8 Intake

HEY GUYS
finally back from DDMworks AN AWESOME DAY with Dave @ DDMworks

To answer some questions...

1) We used the Uni filter because it gave better fuel trims. it actually made it a little richer.

2) at 6350 rpm..the new intake was pushing about 15.2lbs of air thru which is amazing.

3) no coil cover yet. i just painted my cover red and added their sticker lol

4) Responsiveness and throttle is sooooooooooo much better


i shot a video with it before i came home. will post link in a few

 

[rdss]

Well.... The cover look nice! Thanks for the update.