Deaddog Saloon
- Thread starter SSpeckerwood
- Start date
sx sonic
New member
But by no means let me dissuade you from trying.
Got any ideas on this?
sx sonic
New member
Neither did I but it's on their website.
Upon review it says DDM charge tube, which is who I thought made it but after browsing the forum for a thread the only posting I found was by BNR.
On DDM's site everything works great. Unfortunately it's $100 more than I can comfortably spend, which is about $200 more than I should spend lol.
Upon review it says DDM charge tube, which is who I thought made it but after browsing the forum for a thread the only posting I found was by BNR.
On DDM's site everything works great. Unfortunately it's $100 more than I can comfortably spend, which is about $200 more than I should spend lol.
ChrisJ
Active member
So,
Looks like I'm buying me one of these badboys.
TurboTorch CST-PT Cutskill Tote Kit (0386-1321) at PlumberSurplus.com
Seems to be exactly what I need for brazing refrigerant lines and apparently Turbotorch is owned by Victor.
So now the question is someone I work with claimed you're not suppose to carry these bottles inside a car? Seems like B.S. to me? Obviously I would carry them in the hatch of the Sonic but is there some kind of law against that?
Looks like I'm buying me one of these badboys.
TurboTorch CST-PT Cutskill Tote Kit (0386-1321) at PlumberSurplus.com
Seems to be exactly what I need for brazing refrigerant lines and apparently Turbotorch is owned by Victor.
So now the question is someone I work with claimed you're not suppose to carry these bottles inside a car? Seems like B.S. to me? Obviously I would carry them in the hatch of the Sonic but is there some kind of law against that?
ChrisJ
Active member
Id in it cute?
SouthFLSonic
Active member
Best I could find that the oxygen tank cant be over 35 Lbs and must be stored in upright position with the cap on. I'd check with your DMV for more rules seeing how crazy NJ is with rules and regulations.
mitdr774
also a dinner prick
The welding supply place gets irritated when i exchange my 75/25 argon tank. I make sure they don't know I drive a car until I have already paid.
One of these days I will look into also picking up a tri mix tank. Might help with stainless welding little.
Changed the liner for my mig welder last night. Hopefully I can get a close to decent weld now. The wire used to get hung up in the liner and feed inconsistently. New liner is kink free.
One of these days I will look into also picking up a tri mix tank. Might help with stainless welding little.
Changed the liner for my mig welder last night. Hopefully I can get a close to decent weld now. The wire used to get hung up in the liner and feed inconsistently. New liner is kink free.
AdorableKaren
Asian Elite
Today I got to watch a guy in a vw hatch almost spit out his hamburger as I zoomed by him in the sonic 
Priceless!!! Is it that shocking to see a woman car enthusiast?
Priceless!!! Is it that shocking to see a woman car enthusiast?
ChrisJ
Active member
Today I got to watch a guy in a vw hatch almost spit out his hamburger as I zoomed by him in the sonic
Priceless!!! Is it that shocking to see a woman car enthusiast?
Or was it because the burger tasted bad.
AdorableKaren
Asian Elite
Ahaha maybe but he tried to catch up with me before I turned
Preloader
The M32 Martyr
I have a lead on a NIB Brembo kit for 15% off. Still approx $2,400, but a far cry from $2,900. Comes with slotted/drilled rotors.
I'm really holding out for the DDMW kit, otherwise I'd be considering it. It would be pretty bad ass to be the only one with the brembos.
If someone is interested and serious, LMK.
I'm really holding out for the DDMW kit, otherwise I'd be considering it. It would be pretty bad ass to be the only one with the brembos.
If someone is interested and serious, LMK.
TheFallenAngel12
New member
My day consisted of work... then going out and shopping for a new kitchen floor. The vinyl the previous owners laid down is beyond hidious! So i had to get it changed out like ASAP! So i saw a store had a good sale going on and went and browsed there invetory and found me a nice peel N' Stick Vinyl 12x12 Tile Set to be my new kitchen floor.
Now to get the current floor cleaned up and prepped for the new vinyl tiles. just going to lay right over the old. Guy said it wouldnt be a problem nor cause any issues. Gave me some stuff to help the new peel N Stick Tile stick to the old flooring material. Gonna install it when i take my vacation in a couple weeks. So ready to have a nice floor to look at when i come home and use my kitchen.
((Refrence - Kitchen1.jpg = Current Floor Style....
Designers Image Bronze Series Vinyl Tile 12 x 12.jpg = New Floor Tile picked Out To Be Installed))
Now to get the current floor cleaned up and prepped for the new vinyl tiles. just going to lay right over the old. Guy said it wouldnt be a problem nor cause any issues. Gave me some stuff to help the new peel N Stick Tile stick to the old flooring material. Gonna install it when i take my vacation in a couple weeks. So ready to have a nice floor to look at when i come home and use my kitchen.
((Refrence - Kitchen1.jpg = Current Floor Style....
Designers Image Bronze Series Vinyl Tile 12 x 12.jpg = New Floor Tile picked Out To Be Installed))
Attachments
-
Designers Image Bronze Series Vinyl Tile 12 x 12.jpg -
Sample For New Kitchen Floor.jpg -
Kitchen - 1.jpg
theenico
New member
I still have my 1987 Lawn Boy 21" 2-stroke mower. All I've done to it over the years is replace pull cords and the bags. Runs like a champ.
mitdr774
also a dinner prick
I would think a Lawn Boy would be of higher quality than a K-Mart branded mower.
This thing runswell on 2 cycle mix even though it is a 4 stoke. Quick puff of smoke on start up and then no smoke at all. It is getting a little tired. excessively long grass and weeds (mostly weeds since that is all that seems to grow well in my yard) will bog it down and sometimes stall it out, but other wise it runs strong.
This thing runswell on 2 cycle mix even though it is a 4 stoke. Quick puff of smoke on start up and then no smoke at all. It is getting a little tired. excessively long grass and weeds (mostly weeds since that is all that seems to grow well in my yard) will bog it down and sometimes stall it out, but other wise it runs strong.
