New Trifecta EZFlash Features- Disable DTCs and Readiness Monitors

[seanp1]

I thought it was plenty informative. he asked a question; I answered it.

I believe the question asker proved my point by asking further questions. :banana:

 

[Eric Smit]

I believe the question asker proved my point by asking further questions. :banana:

I'll accept that, and follow up with additional notes; nothing a tuner releases will be able to remove TC.

 

[$ub$onic]

No but your finger can by pressing a button or pulling a fuse.......

 

[Foxbox]

no but your fingers can by pulling a fuse.......

ftfy.

 

[turbo]

What I already knew based on my reading of many previous threads and discussions......

1.) Tuners will NEVER release a tune that automatically disables these features.
2.) These systems can be permanently turned off by pulling the fuse. This disables all TC systems plus ABS and creates a "disco ring" of lights on the dash.

What I was trying to figure out...
1.) Has anybody figured out how to turn these systems off on startup on their own using this software so that the systems can be activated by pushing the button when the driver desires it?
2.) Have any tuners released a write up on how somebody might do this on their own, of course, assuming liability for their own actions?

 

[seanp1]

Edited for follow up posts. Thanks for the info.

LOL.. I saw what you really posted and I agree opcorn:

 

[turbo]

LOL.. I saw what you really posted and I agree opcorn:

I have many hobbies, and I've belonged to many forums for years. I post about many topics on many forums, and I've never met with resistance to questions quite the same way that I sometimes do on here. This isn't directed at everybody; some people have been quite helpful.

 

[laborsmith]

Turbo should direct his questions to Anonymous as that is the only entity I can think of that might be willing to take on the very real liability involved.

My continuing suggestion to anyone who wants to drive with none of the items nor the chimes/lights consequent to disabling them is this: buy and drive a car that never had them in the first place.

See how simple solutions can be if one is willing to keep an open mind?


Laborsmith

 

[turbo]

Turbo should direct his questions to Anonymous as that is the only entity I can think of that might be willing to take on the very real liability involved.

My continuing suggestion to anyone who wants to drive with none of the items nor the chimes/lights consequent to disabling them is this: buy and drive a car that never had them in the first place.

See how simple solutions can be if one is willing to keep an open mind?


Laborsmith

I thought internet forums were relatively anonymous?

 

[Eric Smit]

I thought internet forums were relatively anonymous?

he means the Internet group 'Anonymous.' basically, we are saying that nobody will touch disabling it with a ten foot pole.

 

[turbo]

Ok gotcha.

 

[emorejnayr]

Anyone know if this has been released yet?

 

[rdss]

No it hasn't. Check here EZ Flash - WOT-Tuning.com for updates....

 

[rdss]

1.5.58.0 was released yesterday. Download it see if it gives you the new options.

 

[emorejnayr]

Nope not on the new update

 

[rdss]

That's no fun. I will keep watching for updates.

 

[dvn]

Just got an email from BNR. It's ready!!!

 

[cndctrdj]

Pretty cool

 

[sx sonic]

How do I load the disabled readiness monitors to the ECM?

I disabled the "catalyst Monitors" as well as "PO420", and "U0121" and selected OK. hundred or so miles later and P0420 popped up.

so i checked the readiness monitors agian and they were all on, what steps am i missing? Ezflash is communicating with the car, I fiddled around with the "import, export" settings but those appear to just be for the sharing part of this new feature.

Please enlighten me

-Tyler

 

[Preloader]

You do have to uncheck them before you flash, but I'm pretty confident you knew that.

Did you also disable p2096 and p2097? Those are lean and rich warnings for second o2, and will alarm the computer when it senses something is amiss.

The export function is so you can save all your adjustments, and import them the next time, so you don't have to remember to unclick all the different TC's every time.

What is reason for disabling U0121?