Fog Light Installation
- Thread starter oldertech
- Start date
Chevy2012sonic
New member
Conner06
New member
Bought my kit from CED, it was perfect and complete. I was going to install myself but it would have cost an hour labor for the BCM flash anyways, so I checked to see what it would cost to see if my dealer would just do a complete install.... $115 later I'm happy. Well worth the money and for $310 total, not a bad deal
Can you plz give me the link to were you ordered your foglight I want to order them for mine
Machinegun007
New member
This is the seller i bought the fogs.
100% safe.
GM 95950429 Fog Lamps Lights Clear Lens Gray Housing 24 Watt New Warranty | eBay
Regards
Conner06
New member
See I am trying to find the rs sonic fog lights and wheels and I cant find them anywhere online do you or anyone know where to find those??
Ms.DannyStone
Still love it
The RS fogs look sooo much better. My sonic came with factory fogs and I hate them.. I want the RS fogs or no fogs at all.
Machinegun007
New member
Hi,
The RS fogs are not compatible with the LS, LT and LTZ fogs, cause they are bigger and not fit into the bumper for these versions. I think is gonna be a bit difficult to find them. I haven't see them on sale at eBay and buy them directly from the dealer surely will be soooo much expensive having that if you want to install them you should change to the RS bumper first.
Regards
The RS fogs are not compatible with the LS, LT and LTZ fogs, cause they are bigger and not fit into the bumper for these versions. I think is gonna be a bit difficult to find them. I haven't see them on sale at eBay and buy them directly from the dealer surely will be soooo much expensive having that if you want to install them you should change to the RS bumper first.
Regards
del cortigo
New member
soo I got this kit from Ebay, it contains some universal wiring, the foglight itself and the cover.
But I don't get it how too mount these, and it ain't obvious in the pictures.
Can i just screw them in my bumber or what.
sorry for the crappy Phone pic.
But I don't get it how too mount these, and it ain't obvious in the pictures.
Can i just screw them in my bumber or what.
sorry for the crappy Phone pic.
SouthFLSonic
Active member
soo I got this kit from Ebay, it contains some universal wiring, the foglight itself and the cover.
But I don't get it how too mount these, and it ain't obvious in the pictures.
Can i just screw them in my bumber or what.
sorry for the crappy Phone pic.
You will need to remove your bumper and install them from the backside of the bumper not the face. Not sure how the car is set up over there but here you also need to go to the dealer and have them reprogram the computer to make to fog lights work.
del cortigo
New member
Thanx for the tip, the kit came with universal wiring so, al lose relais wiring and switch.
Than i don't have to go to the dealer ship.
Than i don't have to go to the dealer ship.
savegejon123
New member
You still have to go to the dealer, even with 100% of the parts installed.
rbmartinez3
New member
I installed after market kit myself. Never visited the dealer. Never removed the bumper. I did end up making my own mounts out of a alluminum flat bar that also works to dissipate the heat generated by the fog light assembly. I mounted my own switches inside and put a relay to cut off current when the high beams come on. I might post up a pic of the finished product after work. Again I never visited the dealer or took off the bumper saved me a lot of money but did take some time. Otherwise it takes away from the DIY if you take it to the dealer.
Sent from my SGH-M919 using Tapatalk
Sent from my SGH-M919 using Tapatalk
Last edited:
SouthFLSonic
Active member
You used a non factory fog light switch that's why you didn't need to go to dealer. It needs to be flashed to the comp I guess.
rbmartinez3
New member
Yeah absolutely thats why I chose this kit because I had no intention of paying the dealer to program something in plus I like the look of my after market switches
Sent from my SGH-M919 using Tapatalk
Machinegun007
New member
The Job you did look good, but as many over here i'd prefer OEM equipment.
Regards
rbmartinez3
New member
Yeah I like oem equipment too but like to be a little different at times. The blue halo feature that oem doesnt have turns heads, thanks for the compliment. I understand that stock look a lot of us are fond of.
Sent from my SGH-M919 using Tapatalk
Ms.DannyStone
Still love it
rbmartinez3
New member
I just shopped around I think I found it cheaper on ebay... Just ended up making the hole on there when it came in
16mm 12V Red LED Angel Eye Push Button Metal Switch Latching for Car Vehicle C | eBay
Car Vehicle 16mm 12V Red LED Angel Eye Push Power Button Metal Switch Latching | eBay
there's different styles even if you want them black instead of stainless steel
16mm 12V Latching LED Power Push Button Black Aluminum Metal Angel Eye Switch | eBay
