Turbo II
- Thread starter AndrewGS
- Start date
AndrewGS
Ultimo Hombre
That's the real bitch. I'm looking into wiring now. I joined AllData but they don't seem to have ALL the data as far as connector pinouts go. I'm going to have to pull a mirror to look at the connector and compare it to the KDM connector. It's not just a couple of extra wires for the signals, I'm afraid.
MaD
Member
It's not in the mirror, you have to go to the door connector. The mirror connector will need lines added and then at the door connector will need new lines... for what I want to do, I figured I would need at least 4 new hot lines... but I can't get the connector apart...
Sent from my SM-G900T using Tapatalk
Sent from my SM-G900T using Tapatalk
Natesriv
Lead Foot
I looked into putting side repeater lights (like they have in Europe) in the fenders of mine... but our turn signals have 2 wires, the lights I bought from Superbright LED's had only two... 
... It may be possible, to perhaps come off the front turn signal wiring, run the line in the inner fender, through firewall grommet, into door wiring tube...up to the mirrors....
Just be careful with the turn signal plug...it's a beyatch and likes to break a little plastic piece off.....
... It may be possible, to perhaps come off the front turn signal wiring, run the line in the inner fender, through firewall grommet, into door wiring tube...up to the mirrors....Just be careful with the turn signal plug...it's a beyatch and likes to break a little plastic piece off.....
AndrewGS
Ultimo Hombre
I looked into putting side repeater lights (like they have in Europe) in the fenders of mine... but our turn signals have 2 wires, the lights I bought from Superbright LED's had only two...
Just be careful with the turn signal plug...it's a beyatch and likes to break a little plastic piece off.....
I'm looking at tapping the front signal output off the BCM connector under the dash.
I need to see the pinouts on the mirror connector because I think they are pinned differently besides having the extra pins for the signal.
I will also go through the door connector but I can't find the pinouts for it on AllData either.
Tapatalking on my iPhone 6.
AndrewGS
Ultimo Hombre
OK, these are power-folding mirrors. I've figured out what wires go where. Now I'm pretty certain that the pins correspond for existing functions on my car's harness, I just need to run the signal lead to the purple wire and the power-fold to the red and green. Fitting, those colors, because I didn't think these were power-folding, so Merry Christmas to me. lol
Tapatalking on my iPhone 6.
Tapatalking on my iPhone 6.
MaD
Member
OK... Im very VERY excited that they are both blinker and folding!!! :banana::banana: from what I remember from the video, you need to have the mirror adjuster from there too to make the mirrors fold in. opcorn: Please MORE PICS!!! and also how to get the new lines in to the connectors for the blinkers... I see my bank account going into the red very soon...
opcorn: Please MORE PICS!!! and also how to get the new lines in to the connectors for the blinkers... I see my bank account going into the red very soon...
AndrewGS
Ultimo Hombre
I'm going to buy the Korean mirror switch. I'm hoping that it doesn't rely on the BCM.
Tapatalking on my iPhone 6.
AndrewGS
Ultimo Hombre
After a test, some thought and discussion with an expert, the signals aren't going to work out of the gate. The power-fold, however, is looking hopeful. It should work after I pop the Korean switch in place. The power-fold doesn't look to rely on the BCM, only the mirror switch, but this is a guess after looking at service manual diagrams.
I'm going to have to follow the turn signal wire from the mirror connector to the BCM, pull it and splice it to the front turn signal output. It would take some programming work to make it work through the BCM and I'm nowhere near the only guy I know of that could possibly do it. I even tried GM's TISWeb tech line and the engineers told me that if it didn't come as an option on the US cars, they couldn't add it with a calibration.
Please, if you pray, I urge you to pray for this to work.
I'm going to have to follow the turn signal wire from the mirror connector to the BCM, pull it and splice it to the front turn signal output. It would take some programming work to make it work through the BCM and I'm nowhere near the only guy I know of that could possibly do it. I even tried GM's TISWeb tech line and the engineers told me that if it didn't come as an option on the US cars, they couldn't add it with a calibration.
Please, if you pray, I urge you to pray for this to work.
MaD
Member
I know this is late, but i finally found the video for the folding mirrors... sorry
https://www.youtube.com/watch?v=Fos_3bMpHOQ
https://www.youtube.com/watch?v=Fos_3bMpHOQ
